| After-sales Service: | Online Service, Spare Parts |
|---|---|
| Warranty: | 1 Year |
| Certification: | TUV, ISO, RoHS, CE |
| Condition: | New |
| Application: | Railway, Farmland, Highway |
| Transmission: | Hydraulic |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier Chinese Official New 215HP GR215A Road Machines Motor Graders for Construction
The motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farmlands etc. It is the necessary construction machiney for national defense construction, urban and rural road constructon and water conservancy construction, farmland improvement and so on.
1.Energy-saving and noise-reducing
Adopt low-speed engine transmission line, low specific fuel consumption of rated point, energy saving and environmental protection; low-speed ratio configuration of transmission system, average fuel consumption reduced by about 8%.
2.Strong Power
Adopting Sichai High-efficiency State III Variable Power Engine.
3.With load rotation
Improve the hydraulic system pressure, blade rotary force greatly improved, high-frequency quenching gear
ring, wear resistance and life expectancy, to achieve load rotation.
4.Efficient operation
The displacement of the hydraulic pump and the hydraulic motor is increased, the speed of the cylinder is increased by 20%, and the operating efficiency leads the industry.
| Basic specification | |
| Engine model | QSB6.7/6CTA8.3 |
| Rated power/speed | 164kW/2200rpm 160kW/2200rpm |
| Dimension(LxWxH) | 9180×2625×3470mm |
| Operating weight(Standard) | 16100kg |
| Performance specification | |
| Travelling speed ,forward | 5,8,11,19,23,38 km/h |
| Travelling speed ,reverse | 5,11,23 km/h |
| Tractive force(f=0.75) | 115.3KN |
| Max. gradeability | 36% |
| Tire inflation pressure | 260 kPa |
| Working hydraulic pressure | 16 MPa |
| Transmission pressure | 1.3~1.8MPa |
| Max. steering angle of front wheels | ±50° |
| Max. lean angle of front wheels | ±17° |
| Max. oscillation angle of front axle | ±15° |
| Max. oscillation angle of balance box | 15 |
| Frame articulation angle | ±27° |
| Min. turning radius using articulation | 7.3m |
| Biade | |
| Maximum lift above ground | 450mm |
| Maximum depth of cutting | 500mm |
| Maximum blade position angle | 90° |
| Blade cutting angle | 28°-70° |
| Circle reversing rotation | 360° |
| Moldboard width ×height | 4270×610mm |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}