China Famous Brand New 160HP GR165 Motor Grader on Sale
Main parameters:
Operating weight :15 tons ,
Moldboard : 3660×610mm,
Detailed configuration:
* Cumins 6BTA5.9-C180-II engine, 130kW.
* Meritor driving axle ,
* Air Conditioner driving cabin ,
* Imported differential mechanism .
Advantages:
Strong power ,Comfortable driving environment .
Adopt imported hydraulic parts .Great working performance .
Optional parts:
* Front mouldboard ,
* Rear scarifier ,
* Shovel blade
1.The GR165 adopts Dongfeng Cumins 6BTA5.9-C180-II turbocharged diesel engine, which has large output torque and power reserve coefficient and low fuel consumption.
2.The torque converter has a large torque coefficient, a high efficiency, a wide effective area, and a good joint operation characteristic with the engine.
3.Energy-saving and noise-reducing: adopt low-speed engine transmission line, low specific fuel consumption of rated point, energy saving and environmental protection; low-speed ratio configuration of transmission system, average fuel consumption reduced by about 8%.
4.With load rotation: to improve the hydraulic system pressure, blade rotary force greatly improved, high-frequency quenching gear ring, wear resistance and life expectancy, to achieve load rotation.
5.Efficient operation: The displacement of the hydraulic pump and the hydraulic motor is increased, the speed of the cylinder is increased by 20%, and the operating efficiency leads the industry.
Item |
|
GR165 |
Basic parameters |
Engine model |
6BTA5.9-C180-2 |
Rated power/speed |
130kW/2200rpm |
Overall dimension (standard) |
8900x2625x3470 |
Total weight (standard) |
15000kg |
Tire specification |
17.5-25 |
Ground clearance (front axle) |
430mm |
Tread |
2156mm |
Space of front and rear axles |
6219 mm |
Performance parameters |
Forward velocity |
5,8,11,19,23,38km/h |
Reverse speed |
5,11,23km/h |
Tractive effort f=0.75 |
77kN |
Maximum gradeability |
25% |
Tire inflation pressure |
260kPa |
Working system pressure |
16MPa |
Transmission pressure |
1.3-1.8Mpa |
Working parameters |
Maximum steering angle of front wheel |
±50° |
Maximum slant angle of front wheel |
±17° |
Maximum oscillating angle of front axle |
±15° |
Maximum oscillating angle of equilibrium box |
±15° |
Maximum steering angle of frame |
±27° |
Minimum turning radius |
7.3m |
Scrape knife |
Maximum lift height |
450mm |
Maximum cutting depth |
500mm |
Maximum tilt angle |
90° |
Cutting angle |
28°-70° |
Angle of revolution |
360° |
Length & chord height |
3660x610mm |
Oil filling amount |
Coolant |
50L |
Fuel tank |
280L |
Engine |
24L |
Transmission |
38L |
Hydraulic oil |
110L |
Drive axle |
28L |
Balancing box |
46 L |