After-sales Service: | 1 Years |
---|---|
Warranty: | 1 Years |
Cab Location: | Adjustable |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Environmental Friendly
- The emission meets EC and EPA new regulation.
- High efficiency hydraulic system to lower the fuel consumption.
- Using environmental friendly material.
- Damping device on the mast to reduce impact and vibration.
- Sound insulating and absorbing device are used to reduce the noise.
Ergonomics design
- Using power braking system to reduce footplate strength.
- Control lever right located to effectively reduce drivers arm tiredness.
- Dual combined switch lever as a car to enable easy operating.
- Wide mast with good visibility.
- Wide space for boarding and driving , increasing leg space.
- Engine automatic monitor control, when the engine oil pressure is too low or water temperature is too high, the engine will be automatically shut off.
Safety performance
- Enclose cabin is made of assembling steel plate, high strength overhead is designed to ensure the safety.
- Parking brake with safety protection device, when parking brake is working, the forklift will not move even the direction lever is turned.
- Safety device in mast hydraulic system prevents material falling down in case of hose broken.
- High pressure hose is designed far away from the driver.
- Safety wire harness, using waterproof plug
Item | Unit | Parameter |
Drive | gasoline/lpg | |
Operator type | Seated | |
Rated capacity/rated load | kg | 3500 |
Load centre distance | mm | 500 |
Service Weight | kg | 4750 |
Tyres | Pneumatic | |
Height, mast lowered | mm | 2169 |
Free lift | mm | 170 |
Lift | mm | 3000 |
Height, mast extended | mm | 4140 |
Height of overhead guard (cabin) | mm | 2150(2250) |
Overall length | mm | 3850 |
Length to face of forks | mm | 2780 |
Overall width | mm | 1225/1725 |
Turning radius | mm | 2440 |
Minimum pivoting point distance | mm | 810 |
Travel speed, laden/unladen | km/h | 18/19 |
Lift speed, laden/unladen | m/s | 0.38/0.45 |
Lowering speed, laden/unladen | m/s | 0.35/0.40 |
Engine | K25 |