After-sales Service: | Online Support |
---|---|
Warranty: | 1 Year |
Type: | Crawler Excavator |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
China Best Brand Xe700d 70 Ton Mining Crawler Excavator with Good Quality
More energy-conservation and environmental protection
* By adopting the international famous brand engine. It meets TIER 3 emission standard, with advantages of strong power, low noise, low fuel consumption and low emission, and is able to meet demands of various construction conditions.
* It adopts high-pressure fuel injection system, and may realize electric control of the whole course of fuel injection through controlling fuel supply actuator and timing actuator with ECM, so as to exactly control fuel injection amount and fuel injection time, thus reducing fuel consumption and enhancing engine efficiency.
More reliable and durable
* XE700D adopts air filter imported with original packaging from the USA, with filtering efficiency reaching 99.99%,and adapts to working conditions with much dust and humidity.
* XE700D is set with three-stage fuel filtering system (one stage for coarse filtering and two stages for fine filtering) to effectively filter sundries in fuel, thus making sure the engine can run continuously and reliably with high load for a long time under severe working conditions. It adopts the latest type visualized oil-water separator, and the replacement time of filter element can be judged according to fuel level; the oil incoming resistance will not change during the whole course of filter element using, so the filter element cost is lower, thus reducing customer's maintenance cost.
Model | Unit | XE700D | |
---|---|---|---|
Operating Weight | Kg | 69000 | |
Bucket Capacity | m³ | 2.4-4.6 | |
Main Performance | Traveling speed | km/h | 4.2/3.0 |
Slewing speed | r/min | 7 | |
Gradeability | ° | 35° | |
Ground pressure | kPa | 101.4 | |
Bucket digging force | kN | 363 | |
Bucket rod digging force | kN | 300 | |
Maximum drawbar pull | kN | 450 | |
Hydraulic System | Main pump | / | 2 plunger pumps |
Rated flow of main pump | L/min | 2×450 | |
Pressure of main relief valve | MPa | 31.4/34.3 | |
Pressure of traveling system | MPa | 34.3 | |
Pressure of slewing system | MPa | 28.5 | |
Pressure of pilot system | MPa | 3.9 | |
Oil Capacity | Capacity of fuel oil tank | L | 950 |
Capacity of hydraulic oil tank | L | 500 | |
Capacity of engine oil tank | L | 48 | |
Overall Dimensions | A Overall length | mm | 12130 |
B Overall width | mm | 4410 | |
C Overall height | mm | 4700 | |
D Slewing table width | mm | 4410 | |
E Track shoe length | mm | 5955 | |
F Total width of chassis | mm | 4000 | |
G Track shoe width | mm | 650 | |
H Wheel base of track shoe | mm | 4685 | |
I Track gauge | mm | 2800/3350 | |
J Ground clearance of counterweight | mm | 1565 | |
K Minimum ground clearance | mm | 853 | |
L Minimum slewing radius of tail part | mm | 4090 | |
M Track height | mm | 1286 | |
Working Range | A Maximum digging height | mm | 11300 |
B Maximum dumping height | mm | 7320 | |
C Maximum digging depth | mm | 6950 | |
D Digging depth on 8" horizontal plane | mm | 6800 | |
E Maximum vertical digging depth | mm | 5550 | |
F Maximum digging radius | mm | 11580 | |
G Minimum slewing radius | mm | 4750 | |
Standard Configuration | Boom length | mm | 6600 |
Bucket rod length | mm | 2900 | |
Bucket Capacity | m³ | 3.8 | |
Optional Configuration | Boom length | mm | 7300 |
Bucket rod length | mm | 3500 | |
Bucket Capacity | m³ | 2.4 (loose soil) 2.8 (rock) 3.1 (rock) 3.5 (rock) 4.0 (reinforcement) 4.6 (earthwork |