Chinese 15ton 200HP Motor Grader Gr180 with Optional Front Blade and Rear Ripper

• After-sales Service: Provide
• Warranty: 1 Year
• Certification: TUV, ISO, RoHS, CE
• Model NO.: GR180
• Condition: New
• Application: Railway, Mine, Farmland, Highway
• Transmission: Hydraulic
• Walking Mode: Wheeled
• Type: Medium-sized Grader
• Rated Power: 142kw
• Total Weight: 15400kg
• Ground Clearance (Front Axle): 430mm
• Tread: 2156mm
• Space of Front and Rear Axles: 6219mm
• Specification: 8970*2625*3470mm
• Origin: Xuzhou China

Product Description

Product Description

Chinese Top Brand 15Ton 200HP Motor Grader GR180 

with Optional Front Blade and Rear Ripper

 

The GR180 motor grader is mainly used for ground leveling, ditching, slope scraping, bulldozing, scarification, snow removal for large areas such as highway, airports, farm-lands etc.

It is the necessary construction machinery for national defense construction, mine construction, urban and rural road construction and water conservancy construction, farmland improvement and so on.

 

Advantages and Highlights:

1. GR180 adopt 6BT5.9-C130- II turbocharged diesel engine, Large output torque and power reserve coeficient and low oil consumption.

 

2. Torque converter has big torque coefficient, wide high efficiency area. It has good combination working characteristics with engine. The transmission box has six forward gears, three backward gears, with neutral start protection function, gear shift controlled by electro-hydraulic, flexible operation, shift without impact, reasonable speed ratio distribution, meet the requirements of various working conditions.

 

3. The rear axle adopts balanced suspension to ensure the uniform load of four wheels, which is conducive to the full use of its adhesion ability. The main drive of the rear axle is equipped with"NO - SPIN" self-locking differential.

 

4. The front axle is steering axle. The axle can swing from side to side. In addition to the front steering, it also uses the articulated frame, which can further reduce the turning radius.

 

5. The hood is structural part, well shaped with turn over function, the two sides double door is reversible, enhances the maintainability.

Detailed Photos

 

Product Parameters

Description		Unit	Parameter value
Engine model			6CTA8.3-C190-2
Rated power/speed		kW/rpm	142/2200
Overall dimension (standard)			8900x2625x3420
Total weight (standard)		kg	15400
Tire specification			17.5-25
Ground clearance (front axle)		mm	430
Tread		mm	2156
Space of front and rear axles		mm	6219
Space of middle and rear wheels		mm	1538
Forward velocity		km/h	5/8/11/19/23/38
Reverse speed		km/h	2005/11/23
Tractive effort f=0.75		kN	≥79
Maximum gradeability		%	≥25
Tire inflation pressure		kPa	260
Working system pressure		MPa	18
Transmission pressure		MPa	1.3-1.8
Maximum steering angle of front wheel			±50°
Maximum slant angle of front wheel			±17°
Maximum oscillating angle of front axle			±15°
Maximum oscillating angle of equilibrium box			Front15° Rear15°
Maximum steering angle of frame			±27°
Minimum turning radius		m	7.3
Scrape knife	Maximum lift height	mm	450
	Maximum cutting depth	mm	500
	Maximum tilt angle		90°
	Cutting angle		28°-90°
	Angle of revolution		360°
	Length & chord height	mm	3965x610
Coolant		L	50
Fuel tank		L	280
Engine		L	24
Transmission		L	38
Drive axle		L	28
Balancing box		L	46

Certifications

Packaging & Shipping

Company Profile

After Sales Service

FAQ