After-sales Service: | Online Service, Spare Parts |
---|---|
Warranty: | 1 Year |
Certification: | CE, ISO9001 |
Condition: | New |
Maximum Lifting Height: | >40m |
Maximum Lifting Weight: | >16t |
Samples: |
---|
Suppliers with verified business licenses
(1)XCA220H is a five-axle 220 t all terrain crane with leading lifting performance, widely used for the lifting operations in general engineering projects, such as construction site, urban renewal, transportation, ports, bridges, oilfields, mines, etc.
(2)Efficient jobsite transfer, convenient and economical: the travel speed is 80 km/h for long distance jobsite transfer; low speed large torque driveline is adopted and the fuel consumption per 100 km is 70 L; low cost for long distance jobsite transfer; there is no need for auxiliary crane for short distance jobsite transfer. 72 t counterweight, auxiliary winch, hook, outriggers, outrigger floats, spare tire, etc. can be carried on board. The jobsite transfer is highly efficient with low cost.
(3)Intelligent control saves time and money: industry-leading intelligent crane boom technology is adopted to provide the most intelligent operation planning and safety protection; innovative multi-mode drive technology combined with axle load detection technology provides double protection for crane traveling safety.
(4)The comprehensive performance is 15% higher than that of competing products.
(5)Single engine, reduced weight, improved performance.
(6)Seven-section boom can be extended to 72 m, fixed jib of 44 m; offset angles of 0°, 20° and 40°; the max. boom+jib can reach 107.3 m.
(7)The max. load moment: 6664KNm.
(8)the total weight of counterweight is 72 t.
(9)Diesel engine, Max. net power of 397kw, and the max. output torque of 2500N.m.
(10)The max. travel speed is 80 km/h, and the max. grade ability is 67%.
(11)6 steering modes.
Category | Item | Unit | Parameter | ||
Dimensions | Dimensions (length×width×height) | mm | 15350×3000×3950 | ||
Wheel base | mm | 2650+1650+2900+1650 | |||
Track (Front/ Rear) | mm | 2590/2590/2590/2590/2590 | |||
Front/ Rear overhang | mm | 2664/2245 | |||
Front/ Rear extension | mm | 1591/0 | |||
Weight | Max. permissible weight | kg | 54990 | ||
Axle load |
1st axle | kg | 11650 | ||
2nd axle | kg | 11650 | |||
3rd axle | kg | 11650 | |||
4th axle | kg | 10020 | |||
5th axle | kg | 10020 | |||
Rated power/rpm | kW/(r/min) | 400/1900 | 390/1900 | ||
Max. output torque/rpm | N.m/(r/min) | 2500/1050~1350 | 2500/(1000~1400) | ||
Travel | Travel speed |
Max. travel speed | km/h | ≥80 | |
Min. stable travel speed | km/h | 1~1.5 | |||
Turning diameter |
Min. turning diameter | m | ≤18.5 | ||
Min. turning diameter at boom tip | m | ≤22.5 | |||
Min. ground clearance | mm | 300 | |||
Approach angle | ° | 18 | |||
Departure angle | ° | 14 | |||
Braking distance (at 30 km/h) | m | ≤10 | |||
Max. grade ability | % | 60 | |||
Fuel consumption per 100 km | L | 72 | |||
Exterior noise level | dB(A) | ≤88 | |||
Noise level at seated position | dB(A) | ≤90 | |||
Main performance | Max. total rated lifting capacity | t | 220* | ||
Min. rated working radius | m | 3 | |||
Turning radius at turntable tail | Counterweight | mm | 5100 | ||
Auxiliary winch | mm | 4883 | |||
Max. load moment | Base boom | kN.m | 6664 | ||
Fully-extended boom | kN.m | 2587 | |||
Fully-extended boom + Jib | kN.m | 1123 | |||
Outrigger span | Longitudinal | m | 9.19 | ||
Lateral | m | 8.3 | |||
Hoist height | Base boom | m | 13.4 | ||
Fully-extended boom | m | 72 | |||
Fully-extended boom + Jib | m | 107 | |||
Boom length | Base boom | m | 13.3 | ||
Fully-extended boom | m | 72 | |||
Fully-extended boom + Jib | m | 107.3 | |||
Jib offset angle | ° | 0,20,40 | |||
Hoisting speed (single line, 4th layer, no load) | Main winch | m/min | ≥130 | ||
Auxiliary winch | m/min | ≥130 | |||
Noise | Exterior noise level | dB(A) | ≤122 | ||
Noise level at seated position | dB(A) | ≤85 |
Suppliers with verified business licenses